public:99_annexes:annex-b-terms-and-definitions:c:configuration_parameter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
public:99_annexes:annex-b-terms-and-definitions:c:configuration_parameter [2026/09/12 17:42] – removed - external edit (Unknown date) 127.0.0.1public:99_annexes:annex-b-terms-and-definitions:c:configuration_parameter [2026/09/12 17:43] (current) – ↷ Links adapted because of a move operation nick_dido
Line 1: Line 1:
 +====== Configuration Parameter ======
  
 +[[public:99_annexes:annex-b-terms-and-definitions:start|Go up to Terms and Definitions]]
 +
 +===== Discussion =====
 +
 +A Configuration Parameter identifies a property whose assigned [[public:99_annexes:annex-b-terms-and-definitions:c:configuration_value|Configuration Value]] affects the configuration or operation of a [[public:99_annexes:annex-b-terms-and-definitions:n:node|Node]].
 +
 +The Configuration Parameter specifies the meaning and constraints of the property independently of the value assigned to it. Its specification identifies information such as its name, identifier, data type, format, units, cardinality, permitted range, default, sensitivity classification, and applicable validation rules.
 +
 +A Configuration Parameter remains distinct from its Configuration Value. The parameter identifies what receives a value. The value supplies the data assigned to the parameter.
 +
 +A [[public:99_annexes:annex-b-terms-and-definitions:n:node_configuration|Node Configuration]] identifies the applicable Configuration Parameters and associates each parameter with a value, value reference, resolution rule, or applicable [[public:99_annexes:annex-b-terms-and-definitions:c:configuration_source|Configuration Source]].
 +
 +===== Definition =====
 +
 +//named configurable property for which a Node Configuration assigns or resolves a value//
 +
 +===== Source =====
 +
 +DIDO Solutions project definition.
 +
 +===== Note =====
 +
 +A Configuration Parameter includes sufficient information to interpret and validate its assigned Configuration Value.
 +
 +A mandatory Configuration Parameter requires a resolved and valid value before the Node enters a state dependent upon that parameter.
 +
 +A material change to a parameter’s meaning, type, units, constraints, or validation rules produces a distinguishable revision of the parameter specification.
 +
 +===== Example =====
 +
 +The parameter `ddsDomainId`, defined as an integer with a permitted range of `0` through `232`, constitutes a Configuration Parameter. The integer `42` assigned to it constitutes its Configuration Value.
 +
 +----
 +
 +<WRAP centeralign>
 +© 2026 Dido Solutions, Inc. and Jackrabbit Consulting, Inc.
 +</WRAP>