GPR-003 — PIM-to-PSM Mapping Definition [Dido Solutions, Inc Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== GPR-003 — PIM-to-PSM Mapping Definition ======

[[public:00-sip-ra:99-annexes:annex-c-requirements:start|Go to Annex C: Requirements]]

===== Statement =====

A Submission that specifies a [[public:99_annexes:annex-b-terms-and-definitions:p:platform_independent_model|Platform Independent Model (PIM)]] and one or more corresponding [[public:99_annexes:annex-b-terms-and-definitions:p:platform_specific_model|Platform Specific Models (PSMs)]] SHALL reference an applicable standard mapping or specify the rules used to map the PIM to each PSM.

===== Requirement Level =====

Mandatory when applicable

===== Applicability =====

This requirement applies when a Submission specifies both:

  - A PIM
  - One or more corresponding PSMs derived from or related to that PIM

===== Rationale =====

A PSM incorporates implementation-platform details that are absent from its corresponding PIM. The relationship between them must therefore be governed by identifiable mapping rules.

Referencing a standard mapping or defining the applicable mapping rules enables evaluators and implementers to determine how platform-independent constructs correspond to platform-specific constructs. It also supports repeatable transformation, consistency analysis, and traceability between model levels.

===== Evaluation Criteria =====

A conforming Submission to which this requirement applies demonstrates that:

  - The applicable PIM is identified
  - Each corresponding PSM is identified
  - The relationship between the PIM and each PSM is stated
  - An applicable standard mapping is referenced or mapping rules are specified
  - The version of each referenced standard mapping is identified
  - Source and target model elements addressed by the mapping can be determined
  - Transformation, refinement, omission, and addition rules are described
  - Platform-specific information introduced by the mapping can be identified
  - Exceptions or deviations from a referenced standard mapping are documented
  - Traceability between applicable PIM and PSM elements can be established

===== Referenced By =====

{{backlinks>public:00-sip-ra:99-annexes:annex-c-requirements:gpr-003-pim-to-psm-mapping-definition}}

===== Notes for Editors =====

This requirement does not apply when a Submission specifies only a PIM and does not include corresponding PSMs.

The requirement does not mandate automated model transformation. It requires the relationship between the PIM and each corresponding PSM to be defined or governed by a referenced standard mapping.

Use the following syntax to include the authoritative Statement on another wiki page:

<code dokuwiki>
{{section>public:00-sip-ra:99-annexes:annex-c-requirements:gpr-003-pim-to-psm-mapping-definition#Statement&noheader&nofooter&noeditbtn}}
</code>

----

<WRAP centeralign>
© 2026 Dido Solutions, Inc. and Jackrabbit Consulting, Inc.
</WRAP>